Metron Accusonic Plus

SHOP WINDOW | ULTRASOUND & GEL | Metron Accusonic Plus

METRON ACCUSONIC PLUS 1/3MHz Ref: A-ACCPLUS

Accusonic Plus 1 & 3 MHz Ultrasound

The Metron Accusonic Plus therapeutic ultrasound now offers 1 and 3 MHz from the one detachable applicator
Microprocessor technology has been used to make the Accusonic Plus compact and easy to use. This technology has allowed a number of useful features to be presented in this machine.

For instance:
Up to 10 treatment programes can be stored in the Accusonic Plus, for quick and easy applications.
An LED bar graph is used to display the amount of Ultrasound transmission occurring, this will assist the practitioner to monitor their own, or their staff's technique and correctly deliver the prescribed amount of ultrasound.

The internal service software runs the calibration procedures, minimising the technicians involvement
Communicates with each transducer to correctly monitor and control frequency and contact sensing.

Specifications:
Frequency: 1.1 MHz +/- 10%
Output power in 2.4 Wats/cm2 +/-10% maximum continuous mode (equivalent to 12 Watts absolute for the 5 cm head)
1.5 Watts /cm2 +/- 10% maximum (equivalent to 7.5 watts absolute for the 5cm head)
Frequency 3.3MHz +/- 10%
Output power in 3.0 Watts/cm2 +/- 10% maximum continuous mode (equivalent to 3 watts absolute for the 1cm head)
Effective Radiating Area: Nominally 0.8 Square Cm +/- 20% (1Cm head) Nominally 5.0 square cms +/- 20% (5cm head)
Power/Intensity display Accurate to +/- 20% of reading for output in excess of 0.2 Watt/CM2.
Beam Non-Uniformity Ratio Nominally 5:1 +/- 20%
Ultrasound Modulation
Modulation modes Continuous or pulsed

Pulsed Modulation:
Pulse Frequency 100MHz +/- 2%
Pulse period 10 milliseconds +/- 2%
Pulse width 1.0, 2.0, 5.0 milliseconds +/- 2%
Pulse Duty Cycle 1:9 (10%), 1:4 (20%) 1:1 (50%) respectively +/- 2%

Treatment Timer
Maximum Treatment Time 30 mins +/- 2%
At time expiration Time display shows zero and a two second audible alarm sounds
Contact Display Function Displays the degree of contact being made with the patient by the treatment applicator. Loss of contact, which activates the contact control feature, occurs at approximately 25% of full scale.
Contact Control Function To detect poor acoustic coupling between ultrasonic treatment applicator and patient. At detection of contact loss the indicator on applicator illuminates red and after 1 second the treatment timer is halted, treatment time display flashes and ultrasonic output power is reduced. On contact detection the treatment timer is restarted and ultrasonic output power is restored to the selected value.

CE approved

Supplied with the following accessories

1 x multi-frequency head (large) 5cm, 1&3MHz
1 x 250ml Ultrasound Gel
1 x Mains Lead

Price AU:$1,849.95 (Including GST at 10%)

Quantity:

SHOP WINDOW | ULTRASOUND & GEL | Metron Accusonic Plus

Physio Supplies Australia - Suppliers to the Public, Patient & Professional

Metron Accusonic Plus

Best Sellers

New Products